Waterjet Parts
Complete Cutting Head Assembly, Water Only (012509-1)
Contact for quote
A full water-only cutting head assembly built on the Insta 2 style on/off valve, from air actuator through to the low-mass nozzle.
Complete water-only waterjet cutting head assembly (reference 012509-1) — built around the Insta 2 style on/off valve, running through a low-mass nozzle body and retainer rather than an abrasive mixing chamber.
Built from an I-2 air actuator, I-2 on/off valve body, I-2 retainer, 3/8" collar assembly, a 5.49" low-mass nozzle body (006145-1, TL-002003-1, 1-14158, 100046-1), a low-mass nozzle retainer (006146-1, 1-13406), and the I-2 High Cycle repair kit (010200-1). Every component is also available individually for service.
Request a Quote for This ItemTechnical Specifications
| Reference Number | 012509-1 (Other ref. code: 301007-10) |
|---|---|
| Type | Complete assembly, water only (no abrasive mixing chamber) |
| Air Actuator | I-2, Normally Closed — 003840-1, TL-004017-1, 1-12129 |
| On/Off Valve Body | I-2 — 010104-1, TL-004016-1, 1-11272 |
| Retainer | I-2 — 004096-1, 1-13049 |
| Collar Assembly | 3/8", On/Off Valve — 002895-1 |
| Nozzle Body | Low Mass, Length 5.49" — 006145-1, TL-002003-1, 1-14158, 100046-1 |
| Nozzle Retainer | Low Mass — 006146-1, 1-13406 |
| Repair Kit | I-2 On/Off Valve Repair Kit, Insta 2, High Cycle — 010200-1, TL-004010-1, 1-13687 |
More from Waterjet Parts
waterjet parts
Waterjet Water Filter Cartridges & Housing
10" and 20" pre-filter cartridges (1, 5, 0.45 micron), a hydraulic filter and a blue filter housing for waterjet pre-filtration systems.
waterjet parts
Waterjet Service Wrenches & Left-Hand Threading Dies
Filter, spanner and cylinder wrenches, an HP seal installation tool kit, and left-hand threading dies (1/4", 3/8", 9/16") for waterjet service.
waterjet parts
Short Stop Filter Assembly, 1/4"
A 1/4" short stop filter assembly for waterjet abrasive cutting heads, with a 9/16-18 screw thread.
Get a Quote