Waterjet Parts
Replacement cutting heads, pump seal kits, check valves and high-pressure tubing/fittings for waterjet cutting systems — cross-compatible with Flow, KMT, H2O, Dardi and AccuStream style equipment, from individual wear parts to complete assemblies.
197 products in this category
Waterjet Water Filter Cartridges & Housing
10" and 20" pre-filter cartridges (1, 5, 0.45 micron), a hydraulic filter and a blue filter housing for waterjet pre-filtration systems.
Waterjet Service Wrenches & Left-Hand Threading Dies
Filter, spanner and cylinder wrenches, an HP seal installation tool kit, and left-hand threading dies (1/4", 3/8", 9/16") for waterjet service.
Short Stop Filter Assembly, 1/4"
A 1/4" short stop filter assembly for waterjet abrasive cutting heads, with a 9/16-18 screw thread.
Short Stop Filter Assembly, 3/8"
A 3/8" short stop filter assembly for waterjet abrasive cutting heads.
Short Stop Filter Assembly, 94K, 1/4"
A 94K-rated 1/4" short stop filter assembly for waterjet abrasive cutting heads, with a 5/8-18 screw thread.
Short Stop Filter Assembly, 3/8" Male to 1/4" Female
A 3/8" male to 1/4" female short stop filter assembly for waterjet abrasive cutting heads.
Inline Filter Assembly, 1/4" (301010-1)
A 1/4" inline high pressure filter assembly for waterjet pumps, rated 60K/4,100 bar with a 61-micron screen-type element.
Inline Water Filter Assembly, 1/4" (05114137)
A 1/4" inline water filter assembly for waterjet pumps, rated 60K/4,100 bar with a 20-micron filter element.
High Pressure Elbow, 1/4"
A 1/4" high pressure elbow fitting for waterjet HP tubing runs, available bare or as a complete assembly with glands and collars.
High Pressure Elbow, 3/8"
A 3/8" high pressure elbow fitting for waterjet HP tubing runs, available bare or as a complete assembly with glands and collars.
High Pressure Elbow, 9/16"
A 9/16" high pressure elbow fitting for waterjet HP tubing runs, available bare or as a complete assembly with glands and collars.
High Pressure Reducer Elbow, 3/8" to 1/4"
A 3/8" to 1/4" high pressure reducer elbow for waterjet HP tubing runs, available bare or as a complete assembly with glands and collars.
High Pressure Reducer Elbow, 9/16" to 3/8"
A 9/16" to 3/8" high pressure reducer elbow for waterjet HP tubing runs, available bare or as a complete assembly with glands and collars.
High Pressure Tee, 1/4"
A 1/4" high pressure tee fitting for branching a waterjet HP tubing run, available bare or as a complete assembly with glands and collars.
High Pressure Tee, 3/8"
A 3/8" high pressure tee fitting for branching a waterjet HP tubing run, available bare or as a complete assembly with glands and collars.
High Pressure Tee, 9/16"
A 9/16" high pressure tee fitting for branching a waterjet HP tubing run, available bare or as a complete assembly with glands and collars.
High Pressure Cross, 1/4"
A 1/4" high pressure cross fitting for branching a waterjet HP tubing run in three directions, available bare or as a complete assembly with glands and collars.
High Pressure Cross, 3/8"
A 3/8" high pressure cross fitting for branching a waterjet HP tubing run in three directions, available bare or as a complete assembly with glands and collars.
High Pressure Cross, 9/16"
A 9/16" high pressure cross fitting for branching a waterjet HP tubing run in three directions, available bare or as a complete assembly with glands and collars.
High Pressure Adapter with Bullet, 1/4" Male to 3/8" Female
A 1/4" male to 3/8" female HP adapter with bullet, for stepping between waterjet tubing sizes.
High Pressure Adapter with Bullet, 1/4" Male to 9/16" Female
A 1/4" male to 9/16" female HP adapter with bullet, for stepping between waterjet tubing sizes.
High Pressure Adapter with Bullet, 3/8" Male to 1/4" Female
A 3/8" male to 1/4" female HP adapter with bullet, for stepping between waterjet tubing sizes.
High Pressure Adapter with Bullet, 3/8" Male to 9/16" Female
A 3/8" male to 9/16" female HP adapter with bullet, for stepping between waterjet tubing sizes.
High Pressure Adapter with Bullet, 9/16" Male to 1/4" Female
A 9/16" male to 1/4" female HP adapter with bullet, for stepping between waterjet tubing sizes.
High Pressure Adapter with Bullet, 9/16" Male to 3/8" Female
A 9/16" male to 3/8" female HP adapter with bullet, for stepping between waterjet tubing sizes.
High Pressure Straight Coupling, 1/4"
A 1/4" high pressure straight coupling for joining two waterjet HP tubing runs, available bare or as a complete assembly with glands and collars.
High Pressure Straight Coupling, 3/8"
A 3/8" high pressure straight coupling for joining two waterjet HP tubing runs, available bare or as a complete assembly with glands and collars.
High Pressure Straight Coupling, 9/16"
A 9/16" high pressure straight coupling for joining two waterjet HP tubing runs, available bare or as a complete assembly with glands and collars.
High Pressure Reducer Coupling, 3/8" to 1/4"
A 3/8" to 1/4" high pressure reducer coupling for stepping between waterjet HP tubing sizes, available bare or as a complete assembly with glands and collars.
High Pressure Reducer Coupling, 9/16" to 1/4"
A 9/16" to 1/4" high pressure reducer coupling for stepping between waterjet HP tubing sizes, available bare or as a complete assembly with glands and collars.
High Pressure Reducer Coupling, 9/16" to 3/8"
A 9/16" to 3/8" high pressure reducer coupling for stepping between waterjet HP tubing sizes, available bare or as a complete assembly with glands and collars.
High Pressure Tubing, 1/4", Prime Quality
Prime-quality 1/4" high pressure tubing for waterjet plumbing runs.
High Pressure Tubing, 3/8", Prime Quality
Prime-quality 3/8" high pressure tubing for waterjet plumbing runs.
High Pressure Tubing, 9/16", Prime Quality
Prime-quality 9/16" high pressure tubing for waterjet plumbing runs.
High Pressure Collar, 1/4" (ACL40)
A 1/4" high pressure tube collar for waterjet HP tubing connections.
High Pressure Collar, 3/8" (ACL60)
A 3/8" high pressure tube collar for waterjet HP tubing connections.
High Pressure Collar, 9/16" (ACL90)
A 9/16" high pressure tube collar for waterjet HP tubing connections.
High Pressure Gland, 1/4" (AGL40)
A 1/4" high pressure gland for waterjet HP tubing connections.
High Pressure Gland, 3/8" (AGL60)
A 3/8" high pressure gland for waterjet HP tubing connections.
High Pressure Gland, 9/16" (AGL90)
A 9/16" high pressure gland for waterjet HP tubing connections.
Bullet / Cone Adapter, 1/4" (400013-1)
A 1/4" bullet-style cone adapter for waterjet HP tubing terminations.
Bullet / Cone Adapter, 3/8" (400013-2)
A 3/8" bullet-style cone adapter for waterjet HP tubing terminations.
Bullet / Cone Adapter, 9/16" (400013-3)
A 9/16" bullet-style cone adapter for waterjet HP tubing terminations.
High Pressure Plug, 1/4" (AP40)
A 1/4" high pressure plug for capping off unused waterjet HP tubing ports.
High Pressure Plug, 3/8" (AP60)
A 3/8" high pressure plug for capping off unused waterjet HP tubing ports.
High Pressure Plug, 9/16" (AP90)
A 9/16" high pressure plug for capping off unused waterjet HP tubing ports.
Dardi Low Pressure Seal Kit, G7/G9 (730710053)
A complete low-pressure seal kit for Dardi G7/G9 waterjet pumps — T-seal, rod seal, U-cup seal and a full set of O-rings.
Dardi Check Valve Repair Kit, G9 (510000142 & 510000138)
A full internal repair kit for Dardi G9 waterjet pump check valves — spacer inlet, insert poppet, screw, insert, poppet and spring.
Dardi G9 Pump Replacement Parts
End bells, end cap, check valve bodies and a reversing sensor for Dardi G9 waterjet pumps.
Dardi-Compatible Cutting Head & Mixing Chamber Parts
SP7/SP5 cutting head bodies, retainer nuts, abrasive inlets and mixing chambers for Dardi-compatible waterjet systems.
Dardi-Compatible On/Off Valve & Actuator Parts
On/off valve assemblies, air actuators, valve bodies, extension tubes and safety blasting valves for Dardi-compatible waterjet systems.
Dardi On/Off Valve Repair Kit (WXD100-A)
A full internal repair kit for Dardi-compatible on/off valves — pin guide, seal seat, seal guide, poppet pin, O-ring and HP seal.
AccuStream-Compatible Cutting Head & Mixing Chamber Parts
DiaLine-style cutting head assemblies, abrasive body assemblies, mixing chambers and nozzle nuts for AccuStream-compatible waterjet systems.
AccuStream-Compatible Swivel, Valve & Fitting Parts
Abrasive inlets, collets, O-rings, swivels and AccuValve bodies for AccuStream-compatible waterjet systems.
AccuStream On/Off Valve and Bleed-Down Valve Repair Kit (1-11328)
A full internal repair kit for AccuStream-compatible on/off and bleed-down valves — seat, needle bearing, seal assembly and needle.
Diamond Cutting Head, Right Hand, .007"/0.18mm Orifice (SLC2-R-07)
A right-hand replacement diamond cutting head for Slice 2 style waterjet systems, with a .007"/0.18mm diamond orifice.
Diamond Cutting Head, Right Hand, .010"/0.25mm Orifice (SLC2-R-10)
A right-hand replacement diamond cutting head for Slice 2 style waterjet systems, with a .010"/0.25mm diamond orifice.
Diamond Cutting Head, Right Hand, .012"/0.30mm Orifice (SLC2-R-12)
A right-hand replacement diamond cutting head for Slice 2 style waterjet systems, with a .012"/0.30mm diamond orifice.
Diamond Cutting Head, Right Hand, .013"/0.33mm Orifice (SLC2-R-13)
A right-hand replacement diamond cutting head for Slice 2 style waterjet systems, with a .013"/0.33mm diamond orifice.
Diamond Cutting Head, Right Hand, .014"/0.35mm Orifice (SLC2-R-14)
A right-hand replacement diamond cutting head for Slice 2 style waterjet systems, with a .014"/0.35mm diamond orifice.
Diamond Cutting Head, Right Hand, .015"/0.38mm Orifice (SLC2-R-15)
A right-hand replacement diamond cutting head for Slice 2 style waterjet systems, with a .015"/0.38mm diamond orifice.
Diamond Cutting Head with Short Stop Filter, Right Hand, .007"/0.18mm
A right-hand replacement diamond cutting head with built-in short stop filter for Slice 2 style waterjet systems, .007"/0.18mm orifice.
Diamond Cutting Head with Short Stop Filter, Right Hand, .010"/0.25mm
A right-hand replacement diamond cutting head with built-in short stop filter for Slice 2 style waterjet systems, .010"/0.25mm orifice.
Diamond Cutting Head with Short Stop Filter, Right Hand, .012"/0.30mm
A right-hand replacement diamond cutting head with built-in short stop filter for Slice 2 style waterjet systems, .012"/0.30mm orifice.
Diamond Cutting Head with Short Stop Filter, Right Hand, .013"/0.33mm
A right-hand replacement diamond cutting head with built-in short stop filter for Slice 2 style waterjet systems, .013"/0.33mm orifice.
Diamond Cutting Head with Short Stop Filter, Right Hand, .014"/0.35mm
A right-hand replacement diamond cutting head with built-in short stop filter for Slice 2 style waterjet systems, .014"/0.35mm orifice.
Diamond Cutting Head with Short Stop Filter, Right Hand, .015"/0.38mm
A right-hand replacement diamond cutting head with built-in short stop filter for Slice 2 style waterjet systems, .015"/0.38mm orifice.
Diamond Cutting Head, Left Hand, .007"/0.18mm Orifice (SLC2-L-07)
A left-hand replacement diamond cutting head for Slice 2 style waterjet systems, with a .007"/0.18mm diamond orifice.
Diamond Cutting Head, Left Hand, .010"/0.25mm Orifice (SLC2-L-10)
A left-hand replacement diamond cutting head for Slice 2 style waterjet systems, with a .010"/0.25mm diamond orifice.
Diamond Cutting Head, Left Hand, .012"/0.30mm Orifice (SLC2-L-12)
A left-hand replacement diamond cutting head for Slice 2 style waterjet systems, with a .012"/0.30mm diamond orifice.
Diamond Cutting Head, Left Hand, .013"/0.33mm Orifice (SLC2-L-13)
A left-hand replacement diamond cutting head for Slice 2 style waterjet systems, with a .013"/0.33mm diamond orifice.
Diamond Cutting Head, Left Hand, .014"/0.35mm Orifice (SLC2-L-14)
A left-hand replacement diamond cutting head for Slice 2 style waterjet systems, with a .014"/0.35mm diamond orifice.
Diamond Cutting Head, Left Hand, .015"/0.38mm Orifice (SLC2-L-15)
A left-hand replacement diamond cutting head for Slice 2 style waterjet systems, with a .015"/0.38mm diamond orifice.
Diamond Cutting Head with Short Stop Filter, Left Hand, .007"/0.18mm
A left-hand replacement diamond cutting head with built-in short stop filter for Slice 2 style waterjet systems, .007"/0.18mm orifice.
Diamond Cutting Head with Short Stop Filter, Left Hand, .010"/0.25mm
A left-hand replacement diamond cutting head with built-in short stop filter for Slice 2 style waterjet systems, .010"/0.25mm orifice.
Diamond Cutting Head with Short Stop Filter, Left Hand, .012"/0.30mm
A left-hand replacement diamond cutting head with built-in short stop filter for Slice 2 style waterjet systems, .012"/0.30mm orifice.
Diamond Cutting Head with Short Stop Filter, Left Hand, .013"/0.33mm
A left-hand replacement diamond cutting head with built-in short stop filter for Slice 2 style waterjet systems, .013"/0.33mm orifice.
Diamond Cutting Head with Short Stop Filter, Left Hand, .014"/0.35mm
A left-hand replacement diamond cutting head with built-in short stop filter for Slice 2 style waterjet systems, .014"/0.35mm orifice.
Diamond Cutting Head with Short Stop Filter, Left Hand, .015"/0.38mm
A left-hand replacement diamond cutting head with built-in short stop filter for Slice 2 style waterjet systems, .015"/0.38mm orifice.
KMT Check Valve Repair Kit, Single Inlet (20489495)
A full internal repair kit for KMT-compatible single-inlet check valves — flat outlet poppet, seat, spring, flat inlet poppet and retaining screw.
KMT Sealing Head Assembly, SI-V (20481005)
A complete SI-V sealing head assembly for KMT-compatible high-pressure pumps — body, gland nut and check valve poppet.
KMT Sealing Head Assembly, SL-IV (05116769)
A complete SL-IV sealing head assembly for KMT-compatible 60Ksi high-pressure pumps — body, gland nut, inlet poppet retainer and check valve repair kit.
KMT Sealing Head Assembly, SL-V (80072349)
A complete 4-cylinder SL-V sealing head assembly set for KMT-compatible high-pressure pumps — bodies, gland nuts, inlet poppet retainers and check valve repair kits.
Check Valve Repair Kit, H2O Style, High Cycle (20458830)
A full internal repair kit for H2O-style, high-cycle check valves used on KMT-compatible waterjet pumps.
Check Valve Repair Kit, .875 Plunger 60K (72169725)
A full internal repair kit for KMT-compatible .875" plunger 60K check valves — flat outlet poppet, seat, springs and inlet poppets for both SL4+ and SL4 seal heads.
Check Valve Repair Kit, .875 Plunger 60K (05133335)
A compact internal repair kit for KMT-compatible .875" plunger 60K check valves — flat outlet poppet, seat, spring guide and flared spring.
KMT SL4 Static Seal Assembly (10110393)
A complete static seal assembly for KMT-compatible SL4 sealing heads — high pressure seal, spacer ring and O-ring.
KMT SL5 Dynamic Seal Assembly
A complete dynamic seal assembly for KMT-compatible SL5 sealing heads, .875" plunger, 60K — high pressure seal, spacer ring and O-ring.
KMT SL5 Dynamic Seal Assembly (1-12339)
A complete dynamic seal assembly for KMT-compatible SL5 sealing heads, with brass back-up ring — replaces part numbers 05149703 and 20422243.
KMT Seal Assembly, .875 Plunger, 55K (05133145)
A complete dynamic and static seal assembly bundle for KMT-compatible .875" plunger pumps rated to 55K.
KMT Seal Assembly, .875 Plunger, 55K (05115977)
A complete dynamic and static seal assembly bundle with extra O-rings for KMT-compatible .875" plunger pumps rated to 55K.
KMT Dynamic Seal Assembly, .875 Plunger, 60K/4150Bar (20422243)
A complete dynamic seal assembly for KMT-compatible .875" plunger pumps rated to 60K/4150Bar — brass back-up ring, spacer rings and dual seals.
KMT Dynamic Seal Assembly, .875 Plunger, 55K/3800Bar (05123385)
A complete dynamic seal assembly for KMT-compatible .875" plunger pumps rated to 55K/3800Bar — brass back-up ring, sealing head spacer ring and dual seals.
KMT Dynamic Seal Assembly, .875 Plunger, 55K/3800Bar (05149703)
A complete dynamic seal assembly for KMT-compatible .875" plunger pumps rated to 55K/3800Bar — brass back-up ring, spacer rings and a low-pressure U-cup seal.
KMT Dynamic Seal Assembly, .875 Plunger, 55K/3800Bar (05027172)
A compact dynamic seal assembly for KMT-compatible .875" plunger pumps rated to 55K/3800Bar — seal with O-ring and sealing head spacer ring.
KMT Pump Cylinder & Piston Replacement Parts
Cylinder bodies, attenuators, hydraulic cylinders, pistons and sealing head bodies for KMT-compatible SLIV/SLV high-pressure pumps.
KMT Pump Sealing Head & Seal Replacement Parts
Sealing heads, HP cylinder hardware, seal cartridges, plungers, O-rings and a stainless booster pump for KMT-compatible SLIV/SLV high-pressure pumps.
KMT Hydraulic Piston Assembly Rebuild Kit (05115951)
A full seal and wear-part rebuild kit for KMT-compatible SLIV/SLV hydraulic pistons.
KMT Repair Kit, Hydraulic Cartridge Seal Assy (80084759)
A full seal and O-ring repair kit for KMT-compatible hydraulic cartridge seal assemblies.
KMT HP Pneumatic Valve Repair Kit, N/O (05116017)
A full internal repair kit for KMT-compatible normally-open high-pressure pneumatic valves — valve seat, back-up ring, bearing disk, stem, seal and O-rings.
KMT Normally Open Round Dump Valve, 60K (20427739)
A complete normally-open round dump valve assembly for KMT-compatible 60K waterjet pumps — body, adapter, gland nut and full repair kit.
KMT-Compatible On/Off Valve Replacement Parts
Actuators, valve bodies, dump valve bodies, gland nuts, nozzle tubes and nozzle nuts for KMT-compatible pneumatic on/off valves.
KMT On/Off Valve Repair Kit, N/C (05116025)
A full internal repair kit for KMT-compatible normally-closed on/off valves — valve seat, back-up ring, bearing disk, stem and seal assembly.
KMT Normally Closed Cutting Head Assembly, Water Only (10178184)
A complete water-only cutting head assembly for KMT-compatible pumps — actuator, valve body, gland nut, nozzle tube, nozzle nut and repair kit.
Diamond Cutting Head, .007"/0.18mm Orifice, H2O Style (301329-1-07)
A complete replacement diamond cutting head for H2O IDE III / Flow P3 style pumps, with a .007"/0.18mm diamond orifice.
Diamond Cutting Head, .010"/0.25mm Orifice, H2O Style (301329-1-10)
A complete replacement diamond cutting head for H2O IDE III / Flow P3 style pumps, with a .010"/0.25mm diamond orifice.
Diamond Cutting Head, .012"/0.30mm Orifice, H2O Style (301329-1-12)
A complete replacement diamond cutting head for H2O IDE III / Flow P3 style pumps, with a .012"/0.30mm diamond orifice.
Diamond Cutting Head, .013"/0.33mm Orifice, H2O Style (301329-1-13)
A complete replacement diamond cutting head for H2O IDE III / Flow P3 style pumps, with a .013"/0.33mm diamond orifice.
Diamond Cutting Head, .014"/0.35mm Orifice, H2O Style (301329-1-14)
A complete replacement diamond cutting head for H2O IDE III / Flow P3 style pumps, with a .014"/0.35mm diamond orifice.
Diamond Cutting Head, .015"/0.38mm Orifice, H2O Style (301329-1-15)
A complete replacement diamond cutting head for H2O IDE III / Flow P3 style pumps, with a .015"/0.38mm diamond orifice.
Diamond Cutting Head with Short Stop Filter, .007"/0.18mm, H2O Style (301329-1-07-SSF)
A complete replacement diamond cutting head with built-in short stop filter for H2O IDE III / Flow P3 style pumps, .007"/0.18mm orifice.
Diamond Cutting Head with Short Stop Filter, .010"/0.25mm, H2O Style (301329-1-10-SSF)
A complete replacement diamond cutting head with built-in short stop filter for H2O IDE III / Flow P3 style pumps, .010"/0.25mm orifice.
Diamond Cutting Head with Short Stop Filter, .012"/0.30mm, H2O Style (301329-1-12-SSF)
A complete replacement diamond cutting head with built-in short stop filter for H2O IDE III / Flow P3 style pumps, .012"/0.30mm orifice.
Diamond Cutting Head with Short Stop Filter, .013"/0.33mm, H2O Style (301329-1-13-SSF)
A complete replacement diamond cutting head with built-in short stop filter for H2O IDE III / Flow P3 style pumps, .013"/0.33mm orifice.
Diamond Cutting Head with Short Stop Filter, .014"/0.35mm, H2O Style (301329-1-14-SSF)
A complete replacement diamond cutting head with built-in short stop filter for H2O IDE III / Flow P3 style pumps, .014"/0.35mm orifice.
Diamond Cutting Head with Short Stop Filter, .015"/0.38mm, H2O Style (301329-1-15-SSF)
A complete replacement diamond cutting head with built-in short stop filter for H2O IDE III / Flow P3 style pumps, .015"/0.38mm orifice.
Dual-Inlet Diamond Cutting Head, .007"/0.18mm Orifice, H2O Style (301329-2-07)
A complete replacement dual-inlet diamond cutting head for H2O IDE III / Flow P3 style pumps, with a .007"/0.18mm diamond orifice.
Dual-Inlet Diamond Cutting Head, .010"/0.25mm Orifice, H2O Style (301329-2-10)
A complete replacement dual-inlet diamond cutting head for H2O IDE III / Flow P3 style pumps, with a .010"/0.25mm diamond orifice.
Dual-Inlet Diamond Cutting Head, .012"/0.30mm Orifice, H2O Style (301329-2-12)
A complete replacement dual-inlet diamond cutting head for H2O IDE III / Flow P3 style pumps, with a .012"/0.30mm diamond orifice.
Dual-Inlet Diamond Cutting Head, .013"/0.33mm Orifice, H2O Style (301329-2-13)
A complete replacement dual-inlet diamond cutting head for H2O IDE III / Flow P3 style pumps, with a .013"/0.33mm diamond orifice.
Dual-Inlet Diamond Cutting Head, .014"/0.35mm Orifice, H2O Style (301329-2-14)
A complete replacement dual-inlet diamond cutting head for H2O IDE III / Flow P3 style pumps, with a .014"/0.35mm diamond orifice.
Dual-Inlet Diamond Cutting Head, .015"/0.38mm Orifice, H2O Style (301329-2-15)
A complete replacement dual-inlet diamond cutting head for H2O IDE III / Flow P3 style pumps, with a .015"/0.38mm diamond orifice.
Dual-Inlet Diamond Cutting Head with Short Stop Filter, .007"/0.18mm, H2O Style (301329-2-07-SSF)
A complete replacement dual-inlet diamond cutting head with built-in short stop filter for H2O IDE III / Flow P3 style pumps, .007"/0.18mm orifice.
Dual-Inlet Diamond Cutting Head with Short Stop Filter, .010"/0.25mm, H2O Style (301329-2-10-SSF)
A complete replacement dual-inlet diamond cutting head with built-in short stop filter for H2O IDE III / Flow P3 style pumps, .010"/0.25mm orifice.
Dual-Inlet Diamond Cutting Head with Short Stop Filter, .012"/0.30mm, H2O Style (301329-2-12-SSF)
A complete replacement dual-inlet diamond cutting head with built-in short stop filter for H2O IDE III / Flow P3 style pumps, .012"/0.30mm orifice.
Dual-Inlet Diamond Cutting Head with Short Stop Filter, .013"/0.33mm, H2O Style (301329-2-13-SSF)
A complete replacement dual-inlet diamond cutting head with built-in short stop filter for H2O IDE III / Flow P3 style pumps, .013"/0.33mm orifice.
Dual-Inlet Diamond Cutting Head with Short Stop Filter, .014"/0.35mm, H2O Style (301329-2-14-SSF)
A complete replacement dual-inlet diamond cutting head with built-in short stop filter for H2O IDE III / Flow P3 style pumps, .014"/0.35mm orifice.
Dual-Inlet Diamond Cutting Head with Short Stop Filter, .015"/0.38mm, H2O Style (301329-2-15-SSF)
A complete replacement dual-inlet diamond cutting head with built-in short stop filter for H2O IDE III / Flow P3 style pumps, .015"/0.38mm orifice.
IDE II Cutting Head Replacement Parts
Clamp nuts, retainer collets, abrasive inlets, O-rings and short-stop filter parts for KMT-compatible IDE II / IDE III cutting heads.
Diamond Cutting Head Assembly, .007"/0.18mm Orifice (20477959007)
A complete replacement diamond cutting head assembly for KMT IDE II heads, with a .007"/0.18mm diamond orifice.
Diamond Cutting Head Assembly, .010"/0.25mm Orifice (20477959010)
A complete replacement diamond cutting head assembly for KMT IDE II heads, with a .010"/0.25mm diamond orifice.
Diamond Cutting Head Assembly, .012"/0.30mm Orifice (20477959012)
A complete replacement diamond cutting head assembly for KMT IDE II heads, with a .012"/0.30mm diamond orifice.
Diamond Cutting Head Assembly, .013"/0.33mm Orifice (20477959013)
A complete replacement diamond cutting head assembly for KMT IDE II heads, with a .013"/0.33mm diamond orifice.
Diamond Cutting Head Assembly, .014"/0.35mm Orifice (20477959014)
A complete replacement diamond cutting head assembly for KMT IDE II heads, with a .014"/0.35mm diamond orifice.
Diamond Cutting Head Assembly, .015"/0.38mm Orifice (20477959015)
A complete replacement diamond cutting head assembly for KMT IDE II heads, with a .015"/0.38mm diamond orifice.
Diamond Cutting Head Assembly with Short Stop Filter, .007"/0.18mm (20477950007)
A complete replacement diamond cutting head assembly with built-in short stop filter, .007"/0.18mm orifice, for KMT IDE II heads.
Diamond Cutting Head Assembly with Short Stop Filter, .010"/0.25mm (20477950010)
A complete replacement diamond cutting head assembly with built-in short stop filter, .010"/0.25mm orifice, for KMT IDE II heads.
Diamond Cutting Head Assembly with Short Stop Filter, .012"/0.30mm (20477950012)
A complete replacement diamond cutting head assembly with built-in short stop filter, .012"/0.30mm orifice, for KMT IDE II heads.
Diamond Cutting Head Assembly with Short Stop Filter, .013"/0.33mm (20477950013)
A complete replacement diamond cutting head assembly with built-in short stop filter, .013"/0.33mm orifice, for KMT IDE II heads.
Diamond Cutting Head Assembly with Short Stop Filter, .014"/0.35mm (20477950014)
A complete replacement diamond cutting head assembly with built-in short stop filter, .014"/0.35mm orifice, for KMT IDE II heads.
Diamond Cutting Head Assembly with Short Stop Filter, .015"/0.38mm (20477950015)
A complete replacement diamond cutting head assembly with built-in short stop filter, .015"/0.38mm orifice, for KMT IDE II heads.
HP Swivel Rebuild Kit, 1/4", SVF304 (B-5910-1)
A full seal, bearing and washer rebuild kit for Flow-compatible SVF304 high-pressure swivels.
HP Swivel Fittings & Shafts, 1/4"
1/4" high-pressure swivel fittings (90°, parallel, dual 90°) and their internal shafts for Flow-compatible waterjet plumbing.
Swivel Repair Kit, 1/4" (B-7441-1)
A full seal and spacer rebuild kit for Flow-compatible 1/4" high-pressure swivels, used on SVF301/SVF302 swivels.
Parallel Swivel Repair Kit, 1/4"
A complete parallel swivel rebuild kit for Flow-compatible SVF302 high-pressure swivels — repair kit plus swivel shaft.
HP Swivel Repair Kit, SVF303
A full seal, bearing and washer rebuild kit for Flow-compatible SVF303 high-pressure swivels.
PCV Poppet/Seat Assembly, Direct Drive (042145-1 / 042145-2)
A pressure relief valve poppet and seat assembly for Flow-compatible direct drive waterjet pumps, in standard and HyPlex Prime-compatible versions.
Check Valve Assembly, Direct Drive (013385-1)
A complete check valve assembly for Flow-compatible direct drive waterjet pumps — body, poppet, seat, guide, spring and outlet cage.
Check Valve Assembly, Eagle (049603-1)
A complete check valve assembly for Flow-compatible Eagle-line direct drive waterjet pumps — body, poppet, seat, guide, spring and outlet cage.
HyPlex Hybrid Minor Maintenance Kit (042218-1)
A minor service kit for Flow-compatible HyPlex Hybrid direct drive waterjet pumps — check valve internals, seals and springs.
HyPlex Hybrid Major Maintenance Kit (042218-2)
A full service kit for Flow-compatible HyPlex Hybrid direct drive waterjet pumps — includes the HyPlex Minor Maintenance Kit plus cylinders, check valve bodies, seal carriers and plungers.
HyPlex Minor Maintenance Kit (712101-1)
A minor service kit for Flow-compatible standard-duty HyPlex direct drive waterjet pumps — check valve internals, seals and springs.
HyPlex Major Maintenance Kit (712101-2)
A full service kit for Flow-compatible standard-duty HyPlex direct drive waterjet pumps — includes the Minor Maintenance Kit plus cylinders, check valve bodies, seal carriers and plungers.
Direct Drive Pump Cylinder & Valve Body Replacement Parts
End caps, high pressure cylinders, check valve bodies, seal carriers and ceramic plungers for Flow-compatible direct drive waterjet pumps.
Direct Drive Pump Check Valve, Seal & Spring Replacement Parts
Check valve poppets, seats, guides, springs, rod seals and dynamic seals for Flow-compatible direct drive waterjet pumps.
HyPlex Prime Minor Maintenance Kit (050624-1)
A minor service kit for Flow-compatible HyPlex Prime direct drive waterjet pumps — check valve internals, seals and springs.
HyPlex Prime Major Maintenance Kit (050624-2)
A full service kit for Flow-compatible HyPlex Prime direct drive waterjet pumps — includes the Minor Maintenance Kit plus cylinders, check valve bodies, seal carriers and plungers.
Sensor Assembly, Electric Shift, 24V
A 24V electric shift sensor and actuator assembly for Flow-compatible waterjet pump on/off cycling, in two build-out levels.
Bleed-Down Valve Repair Kit (004694-1)
A full internal repair kit for the auto bleed-down valve on Flow-compatible waterjet pumps.
Intensifier Short Block Assembly, H2O Style (301003-3-3)
A complete high-pressure intensifier short block for H2O-style waterjet pumps — piston, cylinders, end bells, seals, check valves, sensors and electric shift hardware in one assembly.
Check Valve Assembly, H2O Style (301002-3)
A complete 420MPa check valve assembly for H2O-style waterjet pumps — valve body, 2-poppet repair kit and outlet adaptor.
Intensifier Short Block Assembly (010558-3)
A complete high-pressure intensifier short block for Flow-compatible waterjet pumps — piston, cylinders, end bells, seals, check valves and electric shift hardware in one assembly.
Check Valve Assembly, 420MPa (010559-3)
A complete 420MPa check valve assembly for Flow-compatible waterjet pumps — valve body, repair kit and outlet body.
Check Valve Repair Kit (015866-1)
A full internal repair kit for Flow-compatible waterjet pump check valves, in standard and High Cycle duty versions.
Hydraulic Piston Assembly, New Style (007026-1)
A complete new-style hydraulic piston assembly for Flow-compatible waterjet pumps — piston, snap rings, seal kit and T-seals.
Piston & Plunger Assembly, 60K (301005-3)
A complete 60K-rated piston and ceramic plunger assembly for Flow-compatible waterjet pumps.
Hydraulic Piston Assembly, Old Style (007026-1)
A complete old-style hydraulic piston assembly for Flow-compatible waterjet pumps — piston, snap rings, T-seals, U-cup seal and wear ring.
HP Seal Kit Assembly, Blue, Premium (001198-1)
A premium high-pressure seal kit (.875" ID, blue) for Flow-compatible waterjet pump cylinders, with bronze back-up rings.
HP Seal Kit Assembly, Gray, Premium (001198-1)
A premium high-pressure seal kit (.875" ID, gray) for Flow-compatible waterjet pump cylinders, with bronze back-up rings.
Low Pressure Seal Kit, ESL (010641-1)
A complete low-pressure seal kit for Flow-compatible ESL-style waterjet pump cylinders — T-seals, rod seals, U-cup seal and O-rings.
Low Pressure Seal Kit, ESL, 40Ksi (014314-1)
A 40Ksi-rated low-pressure seal kit for Flow-compatible ESL-style waterjet pump cylinders — T-seals, rod seals, U-cup seal and O-rings.
Waterjet Pump Piston & Cylinder Replacement Parts
Attenuators, hydraulic pistons, cylinders, end bells and related wear parts for Flow-compatible high-pressure waterjet pumps.
Waterjet Pump Valve, Seal & Fitting Replacement Parts
Check valves, ceramic plungers, seal cartridges, tie rods and related fittings for Flow-compatible high-pressure waterjet pumps.
Waterjet Pump Electric Control & Accessory Parts
Shift sensors, solenoid valves, manifolds, seals and cables for Flow-compatible high-pressure waterjet pumps.
Complete Cutting Head Assembly, Water Only (012509-1)
A full water-only cutting head assembly built on the Insta 2 style on/off valve, from air actuator through to the low-mass nozzle.
Complete Cutting Head Assembly, P3 Single-Inlet
A full abrasive cutting head assembly built on the Insta 2 style on/off valve with a single-inlet P3-style mixing chamber.
Complete Cutting Head Assembly, P3 Dual-Inlet
A full abrasive cutting head assembly built on the Insta 2 style on/off valve with a dual-inlet P3-style mixing chamber.
On/Off Valve Repair Seal Kit, Universal Valve, 87K (014988-1)
A full internal seal kit for Flow-compatible 87K-series universal on/off valves.
I-1 On/Off Valve Assembly, Complete
A complete Insta 1 style on/off valve assembly — air actuator, valve body, retainer cap, collar, nozzle body and repair kit.
I-2 On/Off Valve Assembly, Complete
A complete Insta 2 style on/off valve assembly — air actuator, valve body, retainer, collar, nozzle body and repair kit.
I-1 On/Off Valve Repair Kit, Insta 1 (001959-1)
A complete internal repair kit for Flow-compatible Insta 1 style on/off valves, in standard and High Cycle duty versions.
HP Seal & O-Ring, Insta 1 Style (1-11142)
A premium-quality high pressure valve seal and O-ring set for Flow-compatible Insta 1 style on/off valves.
I-2 On/Off Valve Repair Kit, Insta 2 (010200-1)
A complete internal repair kit for Flow-compatible Insta 2 style on/off valves, in standard and High Cycle duty versions.
HP Seal & O-Ring, Insta 2 (1-11276)
A premium-quality high pressure valve seal and O-ring set for Flow-compatible Insta 2 style on/off valves.
P3-Style Cutting Head Assembly, Dual-Inlet
A dual-inlet P3-style cutting head assembly — compatible with Flow-brand Paser 3 cutting heads.
Dynamic ECL-Style Cutting Head Assembly (017364-1)
A dual-inlet Dynamic ECL-style cutting head assembly, reference 017364-1 — compatible with Flow-brand Paser Dynamic ECL cutting heads.
Waterjet Cutting Head Replacement Parts
Individual mixing chambers, nozzle collets, abrasive inlets, spray shields and related wear parts for Flow-compatible cutting heads.
Waterjet On/Off Valve Replacement Parts
Individual air actuators, valve bodies, collars and nozzle bodies for Flow-compatible on/off valve assemblies (Insta 1, Insta 2 and Paser-style).
Waterjet Cutting Head Assembly
A complete on/off-valve-to-nozzle waterjet cutting head assembly, with individually available repair parts.
Waterjet Cutting Head A/C-Axis Swivel
An articulating A-axis/C-axis swivel head for bevel and 3D waterjet cutting, with its own repair kit.
Waterjet On/Off Valve Assembly
A pneumatically actuated on/off valve for waterjet cutting heads, with a full seal and wear-part repair kit.
ECL-Style Cutting Head Assembly (014192-1)
A dual-inlet ECL-style cutting head assembly, reference 014192-1 — a direct-fit replacement for Flow-brand ECL cutting heads.
P4-Style Cutting Head Assembly (041136-1)
A dual-inlet P4-style cutting head assembly, reference 041136-1 — compatible with Flow-brand Paser 4 cutting heads.
P3-Style Cutting Head Assembly, Single-Inlet
A single-inlet P3-style cutting head assembly — compatible with Flow-brand Paser 3 cutting heads (not for DTF113/122/132).
High-Pressure Waterjet Tubing
Stainless high-pressure tubing for waterjet cutting systems, in 1/4", 3/8" and 9/16" sizes rated to 60,000 or 90,000 psi.
Sapphire, Ruby & Diamond Waterjet Orifices
Sapphire, ruby and diamond cutting orifices in multiple OEM-compatible holder styles for waterjet intensifier pumps.
Waterjet Nozzle, Mixing Tube & Focusing Tube
Nozzles, mixing tubes and focusing tubes for waterjet cutting heads, in a wide range of bore/OD/length combinations.
Don't see the exact spec you need?
Send us a drawing or description — sourcing new items to match is most of what we do.