Waterjet Parts
P3-Style Cutting Head Assembly, Single-Inlet
Contact for quote
A single-inlet P3-style cutting head assembly — compatible with Flow-brand Paser 3 cutting heads (not for DTF113/122/132).
Complete P3-style mixing/cutting head assembly for Flow Paser 3-type, single-inlet cutting heads. Note: DTF113/122/132 mixing chambers are not compatible with a genuine Flow Paser 3 cutting head.
Includes: P3-style mixing chamber (1-12765); .281" plastic nozzle retainer collet (009941-1, 1-11357); UHP Eco abrasive inlet, 3.3mm ID; P3-style nozzle clamp; blue spray shield (048149-1); and 2× Buna-N 70A O-rings (-014).
Request a Quote for This ItemTechnical Specifications
| Style | P3 (Paser 3), Single-Inlet |
|---|---|
| Mixing Chamber | 1-12765 |
| Nozzle Retainer Collet | .281" Plastic, 009941-1, 1-11357 |
| Abrasive Inlet | UHP Eco, ID 3.3mm |
| Nozzle Clamp | P3 style |
| Spray Shield | Blue, 048149-1 |
| O-Ring | 2× Buna-N, 70A, -014 |
| Compatibility Note | DTF113/122/132 not compatible with genuine Flow Paser 3 head |
More from Waterjet Parts
waterjet parts
Waterjet Water Filter Cartridges & Housing
10" and 20" pre-filter cartridges (1, 5, 0.45 micron), a hydraulic filter and a blue filter housing for waterjet pre-filtration systems.
waterjet parts
Waterjet Service Wrenches & Left-Hand Threading Dies
Filter, spanner and cylinder wrenches, an HP seal installation tool kit, and left-hand threading dies (1/4", 3/8", 9/16") for waterjet service.
waterjet parts
Short Stop Filter Assembly, 1/4"
A 1/4" short stop filter assembly for waterjet abrasive cutting heads, with a 9/16-18 screw thread.
Get a Quote